Control4 C4-TSMC7-EN-BL Guide d'installation télécharger pdf (Page 4)

5 WakeuptheTouchScreenbyeithertouchingthe

screenorbypressinganybutton.

6 (Optional)YoucanpermanentlymounttheTouch

Screenanddocktoatabletopbyscrewingthe

baseontoaatsurface(screwsnotincluded).

SeeFigure7.

Touch Screen Modes

TheTouchScreenusesthefollowingmodes:

• O.Thescreen,theACPowerindicator,andthe

batteryindicatorarealldark(theTouchScreen

hasnopower).Topowerupthedevice,ensure

thatthebatteryischarged,orthatthedock’s

powercordisconnectedtothedockandthe

TouchScreenisproperlyseatedinthedock.

• Suspend.Thescreenisdark.butthePower

indicatorislit.Towakeupthedevice,pressany

buttonortaptheTouchScreen.See“Power

ManagementBestPractices”fordetails.

• Screensaver.Thescreensaverisrunning.Towake

upthedevice,tapthescreen.

• Wake.Thescreendisplaysanythingotherthana

screensaver.ToforcethedeviceintoSleepmode,

pressandreleasethePowerbutton.

Conﬁgure the Network Settings

Youmustcongurethenetworksettingsonthis

TouchScreensoitcancommunicatewiththeother

devicesintheControl4system.

Tocongurethenetworksettingsforthisdevice:

1 Ifusingawirelessnetwork,ensurethattheWiFi

WAPisonthesamenetworkastheControl4

Controllerinthesystem.

2 Gatherthefollowingwirelessnetwork

informationfromyourWAP:

• SSID(ServiceSetIdentier).

• WEP/WPA/WPA2securitykey,ifenabled.

• IPAddressingRequirements:ThedefaultisDHCP

(withdynamicaddresses).Ifyouneedtousea

staticIPaddress,youmustprovideanetworkIP

addressforthisdevice.

3 OntheTouchScreen,tapMore>Settings>

Network.Ifyouwanttousewireless,under

Wireless,selectEnable;otherwise,skiptoStep4.

Using the Touch Screen as a Tabletop Device

1 Placethe7”PortableTouchScreendockonaat

surface.

2 Power.Thedevicecanbepoweredusingeither

anEthernetconnectororaPoEconnector.

a Insertthepowercableintothepowerjack

slotonthebackofthedevice(seeFigure6).

b Plugthepowercordintoawalloutlet.

c TouseEthernet,plugtheRJ-45connector

intothePoEconnectorandthenintothe

EthernetjackonthebackoftheTouch

Screendock(seeFigure6).

3 YoucanattachtheTouchScreentothedock

usingthescrewsprovidedtopreventtheTouch

Screenfrombecomingdisconnectedand

nonfunctionaleverytimeitisremovedfromthe

dock.

WARNING:PowerotheTouchScreenbefore

insertingthescrews.

ToattachtheTouchScreentothedock:

1 Removethetwo(2)rubberprotectorsfromthe

screwholesonthebottomoftheTouchScreen’s

dock.

2 InserttheTouchScreenintoitsdock.

3 TurntheTouchScreenanddockupsidedown

andinsertthetwo(2)screws(included).

4 ScrewthedocktotheTouchScreen(Figure7).

Figure7.BottomView:DockandScrewHoles

Screw Holes to attach

Touch Screen to DockTouch Screen

Dock Screw Holes for

Permanent Mount

1 2 3 4 5 6 7 8 9

Commentaires sur ces manuels

Pas de commentaire

Control4 C4-TSMC7-EN-BL Guide d'installation Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Moniteurs à écran tactile Control4 C4-TSMC7-EN-BL