Control4 RCZ-SRC2-B Informations techniques télécharger pdf (Page 95)

Connect to a Director

To access your system, you must be connected to a Director. To

connect to a Director (or to change Directors in order to switch the

system your Navigators are accessing), do the following:

1. From the Main menu, select Info.

The Info options bar or list is displayed.

2. From the Info options, choose the Director button. The

Connect to a Director screen appears.

3. In the Connect to a Director list of IP addresses, highlight

your controller's IP address and select Connect.

View or Change Network Settings

From the Network Settings screen, you can view or change IP address

settings, DNS server settings, or wireless settings.

NOTE: The default IP configuration is DHCP Client. This

default setting assumes that your network system has a device

serving as the DHCP Server, such as a network gateway,

switch, or router. If there is not a DHCP server in the network,

you will need to choose another option.

To view or change the network IP settings, do the following:

1. From the Info options, choose the Network button. The

Network screen is displayed.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 119 120

Pas de commentaire

Control4 RCZ-SRC2-B Informations techniques Page 95